[Update 3][TUTORIAL] Daily Banner Designs Ideas

Discussion in 'Map Submission' started by xAqate_, Jul 31, 2020.

  1. xAqate_

    xAqate_ Notable Member

    Messages:
    1,120
    Likes Received:
    13,402
    Trophy Points:
    153
    Aight Guys, Hello there (Again) , i have an another idea its called
    "Daily Banner Designs Ideas"
    means i'am sending two banners designs everyday so follow these intructions (with pics on below) :

    1. Ice Cream

    Things Needed :
    Banner (Any colour)
    Dye
    Loom


    Instructions :
    1. Put the banner on a Loom
    2. Colour the banner with orange dye, and the design should like this : Screenshot_20200731-151053.png
    3. Add a white round design colour Screenshot_20200731-151115.png
    4. Colour the banner again with light blue on the top Screenshot_20200731-151128.png
    5. And repeat a white round design colour again Screenshot_20200803-112449.png
    Voila! , This is the ice cream banner design Screenshot_20200731-151206.png
    2. Sword
    Things Needed :

    Dye (Any colour)
    Banner (Any colour)
    Loom
    Oxyde Flower
    Crafting Table


    Instructions :
    1. Design the banner (on Crafting Table) with Oxyde flower Screenshot_20200731-150745.png
    2. Colour the banner with Pale Design Like this Screenshot_20200731-150812.png
    3. Design the Banner with "Bordure Indentend" (The colour must be same on a banner background) Screenshot_20200731-150832.png Ps : Dont forget this Banner Pattern Paper (It'll wont appear on Loom Designs list ) Screenshot_20200731-150748.png
    4. Design the banner with Half Pale with the same colour of the banner background (LEFT AND RIGHT) Screenshot_20200731-150845.png Screenshot_20200731-150852.png
    Voila, Here's the Sword Banner Design : Screenshot_20200731-151000.png

    3. Alligator's mouth
    Things Needed :

    Lime, Red, White and Pink Dyes
    Loom
    Red Banner


    Instructions :
    1. Design the red banner with pink diamond shape Screenshot_20200801-113829.png
    2. Colour the upper red banner with red dye Screenshot_20200801-113839.png
    3. Add white teeths up and down Screenshot_20200801-113925.png Screenshot_20200801-113930.png
    4. Colour the border with Lime dye Screenshot_20200801-113943.png
    Here's the final design Screenshot_20200801-114149.png

    4. Mirror
    Things Needed :

    Light Blue , Black and White dyes
    Light Blue banner
    Loom


    Instructions :
    1. Colour the Light Blue banner with white gradient Screenshot_20200801-113154.png
    2. Add the Upper pale half design using white dye Screenshot_20200801-113240.png
    3. Add Black Border Screenshot_20200801-113250.png
    Heres the Result : Screenshot_20200801-113322.png
    Page 1
     
    Last edited: Aug 3, 2020 at 4:46 AM
    Wakeful, Eriell, Yuxxa and 6 others like this.
  2. arwaffles

    arwaffles Notable Member Emerald Member

    Messages:
    1,896
    Likes Received:
    72,826
    Trophy Points:
    153
    THIS IS SO COOL :OO
    VERY HELPFUL!! ;D
     
    Yuxxa, B3N, SplashingPaint836 and 2 others like this.
  3. SplashingPaint836

    SplashingPaint836 Notable Member

    Messages:
    2,976
    Likes Received:
    8,275
    Trophy Points:
    153
  4. SplashingPaint836

    SplashingPaint836 Notable Member

    Messages:
    2,976
    Likes Received:
    8,275
    Trophy Points:
    153
    Yes Yes Yes!
     
    Yuxxa and xAqate_ like this.
  5. Yuxxa

    Yuxxa Notable Member Emerald Member

    Messages:
    864
    Likes Received:
    3,094
    Trophy Points:
    133
    Woooo.... Very very awesome :eek:
     
    SplashingPaint836 and xAqate_ like this.
  6. Yuxxa

    Yuxxa Notable Member Emerald Member

    Messages:
    864
    Likes Received:
    3,094
    Trophy Points:
    133
    Btw. Can u make the tutorial banner for my mining cave, please. :<
     
    SplashingPaint836 and xAqate_ like this.
  7. xAqate_

    xAqate_ Notable Member

    Messages:
    1,120
    Likes Received:
    13,402
    Trophy Points:
    153
    uhmm sure? xD
     
    SplashingPaint836 and Yuxxa like this.
  8. Yuxxa

    Yuxxa Notable Member Emerald Member

    Messages:
    864
    Likes Received:
    3,094
    Trophy Points:
    133
    Something like Pickaxe Banner, please
     
    SplashingPaint836 and xAqate_ like this.
  9. xAqate_

    xAqate_ Notable Member

    Messages:
    1,120
    Likes Received:
    13,402
    Trophy Points:
    153
    hmmmm wait lmao
     
    SplashingPaint836 and Yuxxa like this.
  10. ProgZ

    ProgZ Notable Member Diamond Member

    Messages:
    751
    Likes Received:
    2,270
    Trophy Points:
    133
    I like it
    The tutorial seems good for building mirror or some crazy things!
    Have a great day building!
     
    SplashingPaint836, Yuxxa and xAqate_ like this.
  11. xAqate_

    xAqate_ Notable Member

    Messages:
    1,120
    Likes Received:
    13,402
    Trophy Points:
    153
    Errr.... Like this one? xD
    Screenshot_20200801-143454.png
     
    SplashingPaint836, Yuxxa and Eriell like this.
  12. Eriell

    Eriell Notable Member Emerald Member

    Messages:
    1,212
    Likes Received:
    10,255
    Trophy Points:
    153
    I like these banners
     
    SplashingPaint836, Yuxxa and xAqate_ like this.
  13. Yuxxa

    Yuxxa Notable Member Emerald Member

    Messages:
    864
    Likes Received:
    3,094
    Trophy Points:
    133
    Can u make it slightly tilted?
    *it's okey. If u cant and give the tutorial
     
    SplashingPaint836 and xAqate_ like this.
  14. xAqate_

    xAqate_ Notable Member

    Messages:
    1,120
    Likes Received:
    13,402
    Trophy Points:
    153
    bro it is impossible if i tilted it the maximum banner designs is not exceeding 7
     
    SplashingPaint836 likes this.
  15. Yuxxa

    Yuxxa Notable Member Emerald Member

    Messages:
    864
    Likes Received:
    3,094
    Trophy Points:
    133
    It's okey. Can u gimme the tutorial now :>
     
    SplashingPaint836 and xAqate_ like this.
  16. xAqate_

    xAqate_ Notable Member

    Messages:
    1,120
    Likes Received:
    13,402
    Trophy Points:
    153
    where on discord or convo?
     
    SplashingPaint836 and Yuxxa like this.
  17. Yuxxa

    Yuxxa Notable Member Emerald Member

    Messages:
    864
    Likes Received:
    3,094
    Trophy Points:
    133
    Convo ;]
     
    SplashingPaint836 and xAqate_ like this.
  18. xAqate_

    xAqate_ Notable Member

    Messages:
    1,120
    Likes Received:
    13,402
    Trophy Points:
    153
    Page 2

    5. Ender Dragon
    Things Needed :
    Black Banner
    Purple and Black Dye
    Skull Charge and Creeper Charge (Pattern)
    Loom

    Instruction :
    1. Colour the skull charge using purple dye Screenshot_20200801-150712.png
    2. Colour the creeper chrage with Black dye Screenshot_20200801-150720.png
    3. Colour the upper half design with black dye Screenshot_20200801-150733.png
    4. Colour with black lower 1/4 half design and repeat it at 3x Screenshot_20200801-150739.png
    Heres the Result : Screenshot_20200801-150817.png

    6. Zombie Pigman
    Things Needed :
    Pink Banner
    Green, Light grey, pink, black and brown dyes
    Creeper Charge Pattern Design
    Loom

    Instructions :
    1. Colour the banner with Green slant design like this Screenshot_20200801-150913.png
    2. Colour the banner with light grey half slant design Screenshot_20200801-151012.png
    3. Apply the black creeper charge design Screenshot_20200801-151044.png
    4. Colour the banner with brown lower 1/4 half design Screenshot_20200801-151051.png
    5. Add the small mounts design using colour pink Screenshot_20200801-151103.png
    The final result : Screenshot_20200801-151120.png

    7. Fire Dragon
    Things Needed :
    Yellow Banner
    Red and Orange Dye
    Flower Charge and Bordure Identend (Pattern)
    Loom

    Instructions :
    1. Colour the yellow banner with red bordure indentend design Screenshot_20200801-155351.png
    2. Add orange upper gradient Screenshot_20200801-155400.png
    3. Colour with red middle dot Screenshot_20200801-155413.png
    4. Colour the banner with red cross design Screenshot_20200801-155426.png
    5. Design it with orange flower charge Screenshot_20200801-155435.png
    6. Colour with the red upper triangular design Screenshot_20200801-155443.png
    Heres the final result : Screenshot_20200801-155515.png

    8. Hill on a sunset
    Things Needed :
    Magenta Banner
    Green , Orange, and brown dye
    Loom

    Instructions :
    1. Design the banner with brown lower triangular design Screenshot_20200801-112412.png
    2. Add green lower triple small triangles Screenshot_20200801-112426.png
    3. Colour the banner with orange gradient (on the upper side) Screenshot_20200801-112435.png
    Heres the final result : Screenshot_20200801-112523.png
     
    Last edited: Aug 3, 2020 at 2:36 AM
  19. ProgZ

    ProgZ Notable Member Diamond Member

    Messages:
    751
    Likes Received:
    2,270
    Trophy Points:
    133
    U can just,edit the thread
    If you want!
     
    Yuxxa, SplashingPaint836 and xAqate_ like this.
  20. xAqate_

    xAqate_ Notable Member

    Messages:
    1,120
    Likes Received:
    13,402
    Trophy Points:
    153
    Page 3

    9. Rose
    Things Needed :
    black banner
    Red , Green, black and lime dye
    Bordure Indentend , flower charge and thing pattern design
    Loom

    Instructions :
    1. Colour the banner with green flower charge Screenshot_20200801-154410.png
    2. Design the banner with lime thing design like this Screenshot_20200801-154420.png
    3. Add the black half triangular design Screenshot_20200801-154437.png
    4. Apply the red 1/4 upper square design Screenshot_20200801-154451.png
    5. Use border indentend design with black dye Screenshot_20200801-154501.png
    6. Apply with black upper triple small triangles Screenshot_20200801-154628.png
    Heres the final result : Screenshot_20200801-154716.png

    10. Iron Pickaxe
    Things Needed :
    White banner
    White , black and brown dye
    loom

    Instructions :
    1. On a white banner, design with X design using black dye Screenshot_20200801-143943.png
    2. Colour it the lower 1/4 half design using black dye again Screenshot_20200801-143953.png
    3. Design it with brown flat cross design Screenshot_20200801-144003.png
    4. Colour it with white half pale design Screenshot_20200801-144121.png
    5. Colour it with 1/2 upper design using black dye Screenshot_20200801-144127.png
    6. Colour it with black border design Screenshot_20200801-144132.png
    Heres the final result : Screenshot_20200801-144158.png
     
    Last edited: Aug 3, 2020 at 4:45 AM
    Yuxxa, quackk and SplashingPaint836 like this.

Users Viewing Thread (Users: 0, Guests: 0)

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.